JUST A LITTLE TREASURE BOX

Hello, every one!!! Thank you for coming for my DT project that's being presented over at Sheila's today!!!

As for my project today, after spending so much time working on another project I thought was due yesterday but which isn't due until Saturday, I hadn't much time to prepare a design project for today and, for the life of me, my mind went blank leaving me with nothing much exciting to do for you.  Normally, I start planning a week or so in advance for my DT projects but I was unable to do that this time around.  Fortunately, not intending to let you down, I knew I could always do a box if nothing else -- if you know me, you know I love boxes!!!  So, I put together this little treasure box for you (due to the Glossy Accent on the stamp of the woman's face there's a reflective glare, sorry about that):

Here's another view of the box:

This simple and easy little box may not be very exciting and/or what you expected but I hope you like it nevertheless.  It's so simple and, as a crafter, you can probably put one together yourself in a jiffy; however, if not, at the end of this post tutorial you'll find a simple cut.file you can use or copy the pattern from.   I put it together by first cutting out the 2 page cut file (the box and lid/cover, and the decorative paper panels):

Here's what the pattern pieces looked like once they'd cut:

Next I folded and bone-folded all the folds along each fold line on the box as noted in the picture below by the white markings:

Easy, right?!  After all the folds were done, I turned the box over, grabbed the lid/cover and glued the panels on both the box and lid/cover pieces:

To enhance the color-depth of the paper, with a sponge I used Weathered Wood colored Distress Ink (which is a bluish color close in the color of the paper) to rub ink very litely onto the box and lid/cover; following that application, I used the tip end of the box of  black StazOn Ink to distress the paper a bit by litely streaking the paper with the tip end of the inkpad:

Next, using 2 large stamps, I randomly stamped the panels capturing the image of the woman's face on the lid/cover:

After the ink and stamping was applied to both the box and lid/cover, I glued the box together and glued the lid/cover to the back of the box about 1" in:

At this point the box is done.  But, of course, that naked box must be better dressed to impress... right?!!!  So, I decided on my embellishments.  The Tim Holtz keys and locks looked perfect to me; and I grabbed a couple of metal filagree which I cut into pieces to use on the lid and on the box corners:

(To dull and or lessen the sharp color the silver filagrees, I painted them with black paint and then rubbed off the paint.  They then blended in well with the the silver lock and key)

You can see from the picture of the completed box at the top of the post how these pieces all  came together.  To finish it off, I highlighted and gave dimension to the stamped face of the woman on the lid/cover with some Glossy Accents, added small silver beads to the bottom of the box as the feet to raise the box a bit, used black diamond color Stickles to outline the edges of the box and lid/cover, and used a black Viva Pearl Pen to add the black pearls -- all done!!!  To keep my box closed/secure, I simply tucked it behind top of the Tim Holtz lock embellie.

It wasn't what I would have done had I had more time to plan but, overall, for a rush job I'm pretty satisfied with it!  I hope you like it too!

Thanks for joining me; I so much appreciate your taking the time to stop by.

Hugs, and I'll be seeing you!


http://www.4shared.com/file/v4pLI5um/Treasure_Box_-_George.html" target=_blank>Treasure Box - George.cut